通过与现有控制装置的简单兼容性，跟踪和监测液体和高压流量从未如此容易。eFlo专为在最恶劣的工业环境中使用而设计，可轻松更换手动流量计，并无缝集成到现有的控制系统中。
| Available with electronic valve and without control valve |
| Digital display with easy-to-use touch pad |
| Precision flow measurement |
| Direct and remote setpoint control |
| Utilizes FlowMeter View software |
| Easy retrofit for existing flow measuring equipment |
| Flow calibration can be certified while in use to meet CQI-9 requirements |
| SCADA Integration: Current Flow, Totalized Flow, Setpoint, Cost Calculation |
| Built-in high/low flow alarms |
| Flow totalizing |
| Analog control and feedback for data acquisition |
| Integrated comms via Modbus over RS485 |
| Indicator LEDs: Process Data Display; Alarm (Hi/Low); Auto/Manual; Open/Close; Motor Drive |
| Tactile Keypad: Totalizer; Reset; Setpoint; Auto/Manual; Setup |
| USB configuration |
| Ethernet |
| Mobile friendly configuration |
| 1/2″ NPT |
| Power Required: | 24VDC @ 400mA |
| Accuracy: | ±4% |
| Turndown Ratio: | 6:1 |
| Medium Temp. Limits: | -10°F to 150°F (-20°C to 65.6°C) |
| Ambient Temp. Limits: | -10°F to 150°F (-20°C to 65.6°C) |
| Flow Output Signal (Linear): | 4-20mA |
| Max. Output Signal Load: | 500 Ω |
| Input Control Signal (Linear): | 4-20mA |
| Response Time: | 1 – 10 seconds |
| Communications: | RS485, Ethernet |
| Communications Protocol: | Modbus RTU, TCP |
| Flow Meter Pressure Limits: | 50 psig max (Liquid) 80 psig max (High Pressure) |
| Pipe Fitting | 1/2″ NPT |
