Status

The Status screen shows the addresses of the connected boards that are communicating with the controller.

 

The O₂ Boards are the active circuit boards that are obtaining the oxygen measurement from each sensor.

 

The O₂ Retransmission Boards (optional) are the circuit boards that provide an analog output (4-20mA) of the oxygen measurement from each sensor.  The electrical connections should be made in accordance with the electrical schematic located at the back of this manual, with 4 to 20mA corresponding proportionally to 0 to 25% oxygen. The ability to retransmit the oxygen signal requires circuit boards that are not part of the standard system. For additional information regarding this feature, please contact Super Systems Inc. (513-772-0060).