Basic Configuration Menu

These values are read-only and are meant for diagnostic purposes.

Flow:

The current flow reading

Inlet Pressure:

Line Pressure measured by the high pressure sensor; the value is based on the unit set in the Units menu.

Differential Pressure:

Pressure measured by the high and low pressure sensors; the value is based on the unit set in the Units menu.

Gas Temperature:

Line Temperature; the value is based on the unit set in the Units menu.

Max Tare Button:

This button is used to set the max valve position. The eFlo must be in manual mode. Manually open the valve until the max flow is achieved, then press the button.

Zero Tare Button:

This button is used to zero the meter reading. The eFlo must be in manual mode.  Manually close the valve, then press the button.

Press to return to the menu screen.