Warnings

Although it is intended for use in an industrial environment, the Simple Dew is a sensitive piece of analysis equipment.  Care should be taken not to drop the analyzer or to operate it in a manner inconsistent with its intended use. 

 

• · Open all sample ports and remove all soot and/or moisture from the lines prior to attaching the sample tubing for the first time.

 

• · The analyzer should be stored at ambient temperature (65-80°F or 18-27°C) for at least two hours prior to operation.

 

• · If the unit is to be returned to SSi for service or any other reason, protect the instrument with at least four inches of foam or other impact-absorbing material on all sides and place it in an appropriately sized cardboard box.

 

• · This unit is not designed to measure the dew points in corrosive gases, such as Ammonia, SO₃, Chlorine, and HCL.

 

• · Please read and understand this Product Manual before operating the unit.

 

Failure to comply with these conditions may cause damage to the unit that will not be covered under the warranty.  Super Systems Inc. is not responsible for damage to this unit caused by disregard of these warnings, neglect, or misuse.