5.2.22.1 Recovery Point Save

 

rEc.S

Select rEc.S to configure Recovery point save.

 

This allows the current configuration and operational settings of the controller to be saved.

 

To Save Current Settings

Select rEc.S Select SAvE.

The display shows busy indicating that the save operation is in progress.

 

Followed by done indicating that the values have been stored.

 

If the save operation has been unsuccessful FaiL will be displayed

none

Do nothing (factory default)

Save

Take a snapshot of current configuration (P Code) and operator settings (Level 2).

If subsequent changes are made to settings in the controller it is then possible to revert to these stored values if required.