4.6.1 To Select Level 2

Operation

Action

Indication

Notes

Select Level 2

1. Press and hold until Goto is shown.

2. Press to choose Lev 2 (Level 2).

3. Press to enter.

Choices are:-

Lev1

LEv2

ConF

Enter the pass code (if configured)

4. Press or to enter the

correct pass code

5. Press to accept the value

6. The controller is now operating in Level 2

The default pass code for level 2 is ‘2’.

A special case exists if a security code has been configured as ‘0’. If this has been done it is not necessary to enter a code and the controller will enter the chosen level immediately.