Instrument Configuration (Menu Option)

 

 

The Instrument Configuration menu allows the user to set values for various SGA paramaters. 

 

• Min. H2: This reading indicates the point at which anything below will be read as zero for internal calculations.

• N2 Flow: The value entered here will be used in nitriding calculations.  Enter the applicable N2 flow in your system.

• NH3 Flow: The value entered here will be used in nitriding calculations.  Enter the applicable NH3 flow in your system.

• DA Flow: The value entered here will be used in nitriding calculations.  Enter the applicable DA flow in your system.

• H2 Flow: The value entered here will be used in nitriding calculations.  Enter the applicable H2 flow in  your system.

• CO2 Pres: (0-10) – Any value entered here will be used in place of the actual CO2 reading for internal calculations.  (Zero is the default setting)

• Suppress Negative %H2: When activated, any negative readings will be treated as zero.

 

To change an item, tap the desired row, then tap “Set Value.”  Enter the desired value in the “Input” box and click the “Set Val” button.  Your new value will be displayed in the “Current” column.