Notes

Version 1.101.0.71 & Below

• When the SDS 8020 option is selected, the SDS software automatically fills in “20” in the “Number of TCs” field and Check boxes 21 through 40 (Boards 5 through 8) are disabled

• When the SDS 8040 option is selected, the SDS software automatically fills in “40” in the  “Number of TCs” field and Check boxes 21 through 40 (Boards 5 through 8) are enabled

• When “20” is typed into the “Number of TCs” field, the SDS 8020 option is automatically selected, and Check boxes 21 through 40 (Boards 5 through 8) are disabled

• When “40” is typed into the “Number of TCs” field, the SDS 8040 option is automatically selected, and Check boxes 21 through 40 (Boards 5 through 8) are enabled

General Notes

• Checking “Use these active TC settings” will enable the checkboxes

• Unchecking “Use these active TC settings” will disable all 40 check boxes.  The TC check boxes will still be checked, but the SDS instrument will not use these settings.