Menu List

The menu list shows the available pages displayed six at a time.  To access the list, press the Esc key.  Depending upon where you are starting from, it may require pressing this button more than once.  The up (é) and down (ê) arrows are used to scroll through the selections, which are repeated below.  To go to a specific page, either type in the page number and press Enter, or use the arrow keys to highlight the selection and press Enter.

    Operator Level – No Pass Code Required

  1. Overview Display

  2. Display Input Settings

  3. Display Input Settings

  4. Display Input Offsets

  5. Display Logged Data

  6. Help

  7. Select Input Channels

  8. Modify Input Settings

  9. Modify Input Offsets

  10. Select Survey Template

  11. Battery Status

  12. About/Sign-On

  13. Revision Display

  14. Set Display Values

  15. Language/Lengua

  16. Quick Chart

  17. Overview Display Selected

  18. Quick Chart Setup

  19. Modify Survey Information

    Supervisor Level – Level 1 Pass Code Required

  1.   Set the Date and Time

  2.   Port Setup

  3.   Input Calibration

  4.   Cold Junction Trim

  5.   System Setup

    Configuration Level – Level 2 Pass Code Required

25.  Set Pass Codes

26.  Set IP Address

Menu Pages 27, 28 and 29 are reserved for future use and do not exist at this time.  To minimize the possibility of unintended modifications to the instrument, certain menu pages will require the entry of a pass code to access them.  Pages 1 through 18 are Operator level screens that do not require any security codes.  Pages 20 through 24 are Supervisor screens requiring a Level 1 pass code (default = 1).  Pages 25 and 26 are Configuration screens requiring a Level 2 pass code (default = 2).  At the bottom of the menu screen is a status bar, which tells the current date and time.  The status bar also displays the internal temperature (IT) of the instrument.  This internal temperature should never exceed 50.

Note About Menu Numbers

Each menu screen has a unique number that is displayed in the upper left-hand corner of the screen.  This number is shown for reference.  If you know the menu number of the screen that you would like to go to, the screen number can be typed and the enter key pushed to access that particular screen directly from the Main Menu list or the Overview Display screen.

Date and Time Quick Reference Charts
Month Code
January 1
February 2
March 3
April 4
May 5
June 6
July 7
August 8
September 9
October 10
November 11
December 12

 

Day Code
Sunday 0
Monday 1
Tuesday 2
Wednesday 3
Thursday

4
Friday 5
Saturday 6

 

Hour Code
12am 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11

11
Hour Code
12pm 12
1 13
2 14
3 15
4 16
5 17
6 18
7 19
8 20
9 21
10 22
11

23