Minimum Millivolts for sampling (0 = disabled)

This value is the lowest number of millivolts at which sampling will take place. When the number of millivolts drops below this value, the COF/PF adjustment will stop; the sample pump will turn off only if the pump is set to “Auto” mode and the Minimum Millivolt Condition is set to “Also stops pump” (see below). To use this feature, the instrument should be communicating with an instrument that can provide real-time probe millivolt data.  The purpose of this function is to prevent the instrument from pulling a bad sample, which could potentially damage the sensors. This will prevent adjustments from being made when the proper conditions are not met.  The minimum millivolts set point should be slightly higher than the minimum millivoltage that is expected.