Analog Output Setup

 

Board

NOTE: This option requires board selection.

 

The MZA 6010 has four analog outputs per zone. These outputs can be configured for variable, zone number, Milliamps, zero value, and span value.

• · The Variable is the process variable that applies to that analog output. Possible values are CO, CO₂, CH₄, High CO₂, IR % carbon, H₂, O₂, and Probe %C.

• · The Zone Number is the zone number to which each analog output applies.

• · MA represents the Milliamp range used for each analog output signal. Options are 4-20mA and 0-20mA.

• · The Zero Value is the value that corresponds to the lowest value on the Milliamp scale.

• · The Span Value is the value that corresponds to the highest value on the Milliamp scale.