Other Settings

 

NOTE: This option requires zone selection for enabling dew point calculation in particular zones.

 

This screen determines whether dew point calculations are enabled.  This value is not normally displayed because it is only accurate during certain conditions.  Calculating dew point by using the gas values requires assumptions to be made regarding the composition of the gas being sampled.  Since these assumptions are not always accurate, the resulting dew point is not always accurate.  When using endothermic gas in a heat treating environment, the calculated dew point will usually be close to the correct value, but there is no substitute for a dew point that is determined through direct measurement of the moisture content of the gas. 

 

When the dew point is enabled, it will appear near the bottom left of the Carbon Calculation screen.