Minimum Millivolt condition (0 = disabled)

This determines the behavior of the MZA 6010 when the minimum millivolts value is reached. Two settings are available:

• · Also stops pump. When this setting is selected, the sample pump will be stopped if the pump is set to “Auto” mode, and COF/PF adjustment will be stopped.

• · Only inhibits adjust and control. When this setting is selected, COF/PF adjustment will be stopped, and the sample pump will be allowed to run.

To use this feature, the instrument should be communicating with an instrument that can provide real-time probe millivolt data.  This is another feature that is intended to prevent the analyzer from pulling a bad sample and potentially damaging the sensors.