Mechanical Installation / Enclosure Mounting

 

It is recommended that the MZA 6010 enclosures be mounted as close to the sampling points as possible, since that will reduce the length of the plumbing lines that will need to be maintained.  The MZA 6010 is intended for use in a heat treating environment, but care should be taken not to mount the enclosures too close to a furnace or other heat source.  The operating temperature of the enclosures should be maintained below 122°F (50°C).  If necessary, a heat shield can be mounted behind the enclosures to reduce the amount of radiant heat that the system is exposed to.  In most cases, this will not be necessary.

 

The enclosures are heavily vented to prevent the buildup of potentially harmful gases in the unlikely event of an internal leak.  This venting will also reduce the internal temperature by allowing the free flow of ambient air around the internal components.