Alarm Settings - Page 1

 

This screen will allow the user to set the alarm source, alarm action, and the alarm set point. 

 

 

 

To set the alarm source, press the up arrow next to the source.  This will display ten buttons from which the user can select the alarm source:

 

PV1

PV2

PV3

Input 1

Input 2

Input 3

% Output 1

% Output 2

% Output 3

Back Screen

 

The current alarm source will be displayed at the bottom of the screen.  The Back Screen button will display the Alarm Settings page 1 menu screen.  To set the alarm action, press the up arrow next to the action.  This will display a screen with seven buttons from which the user can select the alarm action:

 

 

Process High

Process Low

Band Normally Open
Band Normally Closed

Deviation NO

Deviation NC

Back Screen

 

The current alarm action will be displayed at the top of the screen.  The Back Screen button will display the Alarm Settings page 1 menu screen.  To set the alarm setpoint, press the value and enter the new setpoint on the keypad displayed.  Pressing the More >>> button will display page 2 of the Alarm Settings menu.  Pressing the Menu button will display the Alarms menu.