Communication Setup

 

The Communication Setup menu option will allow the user to set up the communications parameters for the DAQ.

 

Communication Setup Menu

 

 

Host 232 Baud

This option will allow the user to set the Host 232 baud rate. The options are:

1200 2400 115200

4800 9600

14400 19200

28800 38400

57600 76800

 

Aux 232 Baud

This option will allow the user to set the Aux 232 baud rate. The options are:

1200 19200 115200

2400 28800

4800 38400

9600 57600

14400 76800

 

Host 485 Baud

This option will allow the user to set the Host 485 baud rate. The options are:

1200 19200 115200

2400 28800

4800 38400

9600 57600

14400 76800

 

Host 485 Address

This option will allow the user to set the Host 485 address. The range is 1 through 249.

 

Aux 1 (5,6) Baud

This option will allow the user to set the Aux 1 baud rate. The options are:

1200 19200 115200

2400 28800

4800 38400

9600 57600

14400 76800

 

IP Address/IP Mask/IP Gateway

These options will allow the user to change the various IP addresses of the DAQ. Contact Super Systems Inc at 513-772-0060 or your IT department for help in changing any of these addresses. Note: Once the IP address has been changed, communications with the DAQ will be lost until the correct IP address is entered on the System Management screen (Step 3: Configure Configurator 2.0 on the local computer section above). Clicking on any of these options will allow the user to change all of the options at once.

 

Edit IP Address