Using the Emery Cloth on the Steel Wire Coil

 

Before the wire coil is attached to the CAT-100 for analysis, the two ends of the wire should be cleaned. An emery cloth is provided for this purpose. It is recommended that each wire end be lightly cleaned with emery cloth, as pictured in Figure 13 - Using emery cloth on wire coil.

 

Figure 13 - Using emery cloth on wire coil

IMPORTANT!

 

The correct type of emery cloth must be used for acceptable results. SSi sells a fine grade, 150 grit emery cloth for use in this process. See the Replacement Parts List for more information.