Update

The Update menu (Figure 35 ) is used to perform an automatic update of operating parameters. In order for the update to work, the CAT-100 must be connected to an Ethernet network with Internet access. Press the “START” button to begin downloading the calculation update.

Figure 35 - Update Screen

NOTE: If the CAT-100 is connected to a network with Internet connectivity but fails to update properly using this menu, turn on dynamic IP assignment (following  the procedure described in the DHCP Button section and try the update again. If you continue to have problems after doing this, please call SSi at (513) 772-0060.

Press the button to return to the menu list.