Ethernet Setup

     

    The Ethernet Setup menu (Figure 33) allows you to change settings for the network adapter on the CAT-100. The following settings can be changed:

    • Address (IP Address). The IP address of the CAT-100.

    • Subnet Mask. The subnet mask for the CAT-100. If you intend to create an Ethernet connection between the CAT-100 and a computer, all of these values must match the subnet mask of the computer you are using to connect to the CAT-100.

    • Gateway. The IP address of the router or network device that manages traffic on the network.

     

    Figure 33 - Ethernet Setup Screen

     

    Each of the numeric values may be changed by first tapping the numerical block and then using the numeric keypad to enter a new value.

     

    IMPORTANT!

     

    If you are uncertain of the correct network settings for the CAT-100, first consult your network administrator. Incorrect network settings may cause the CAT-100 to be unusable on the network and may even cause network problems for other devices on the network (such as computers and other connected instruments).

     

     

    Press the button to return to the menu list.