SD/Flash Card & Card Reader

 

Never remove the SD or Flash Card when the Operator Interface is “ON”.

 

To properly shut down the Operator Interface, press the Menu button on the default status screen. Once the menu has been displayed, select the Shutdown option.  At the prompt, press Yes to shut down the Operator Interface.  See the Chapter 2 – TOUCH SCREEN MENU section for information on navigating and using the menu system.  This will display a conventional Microsoft Windows screen.  On 5.7” screens, sliding the black switch to the OFF position (located directly over the green power connector, on the back of the Operator Interface) will turn off the power to the Operator Interface. On 3.5” and 12.1” screens, the power plug must be unplugged from the electrical socket in order to shut down the screen completely.

 

Warning: Electrical current

 

Utilize caution when handling electronic components of the controller and touch screen, including Compact Flash cards, SD cards, and power plugs. Power off all electronics before removing or inserting cards or performing other operations involving electronic components.

 

Once the Operator Interface is turned off, remove the card from the display unit.  Press the black release button and the card will pop out of the slot.  To replace the card, simply return the card to the slot (if using a Compact Flash card, make sure that the release button is in its UP position), and replace the cover properly.  Do not force the card into the slot. Ensure card orientation is correct if card cannot be inserted into slot. To restore power to the unit, move the black switch to the right or ON position or plug the power cable back into the electrical outlet.