Port Setup

 

Note about ADAM module support: Communications with ADAM analog input modules manufactured by Advantech are not supported as of 9220 firmware revision 2.46. To determine the firmware version of your 9220 instrument, perform a controller data backup using the System Management -> Backup/Restore menu in Configurator. Select Backup -> Online Device. Once the backup is performed, check the Backup Files list for the 9220 as shown in the screen shot. The firmware revision level will be shown.

 

 

Host 232 Baud

This will set the baud rate for RS-232 communications.  The list of options is:

9600        19200        115200

 

Host Mode

This will set the mode rate for RS-232 communications.  This list of options is:

Modbus        Modbus/DF1 Master

 

Host 485 Baud

This will set the baud rate for RS-485 communications.  The list of options is:

1200        14400        57600

2400        19200        76800

4800        28800        115200

9600        38400

 

Host 485 Mode

This will set the mode for RS-485 communications.  The possible settings are Modbus, and Televac MX4A.

 

Host 485 Address

This will set the address for RS-485 communications.  The range is 1 – 247.

 

Client 1 Baud

This will set the baud rate for Client 1 communications.  The list of options is:

1200        14400        57600

2400        19200        76800

4800        28800        115200

9600        38400

 

Client 1 Mode

This will set the mode for Client 1 communications.  This list of options is:

MMI

Modbus

Yokogawa

Modbus Host

 

Client 2 Baud

This will set the baud rate for Client 2 communications.  The list of options is:

1200        14400        57600

2400        19200        76800

4800        28800        115200

9600        38400

 

Client 2 Mode

This will set the mode for Client 2 communications.  This list of options is:

MMI

Modbus

N/A

SSi Analog Input Board

Yokogawa

 

232-2 Port Baud

This will set the baud rate for RS-232 communications.  The list of options is:

9600        19200        115200

 

232-2 Port Mode

This will set the mode for RS-232 communications.  The list of options is:

Modbus        Cal Terminal        Televac        Varian

 

The Return button will return the user to the menu screen.