DF1 Configuration

This option allows the information data from the 9220 to be sent to the PLC DF1 Register map.

My Node:

This option will allow the user to select the node.  This node must not exist anywhere else on the computer’s network.  The range is 0 to 30000.

 

PLC node:

This option will allow the user to select the PLC node.  This must be the node address of a PLC.  The range is 0 to 30000.

 

PLC  read table:

This option will allow the user to select the PLC read table.  The range is 8 to 255.

 

PLC  write table:

This option will allow the user to select the PLC write table.  The range is 8 to 255.

 

PLC Intermessage Delay

This option will allow the user to set the PLC Intermessage Delay in ms.  The range is 0 to 30000.