TC Extension Correction Curves
|
|
This menu option will allow the user to set up to three TC correction curves for the 9215 controller. Clicking on the “click” value for a curve will display the curve edit form. Note: If the first “Temperature” value and the first “Error” value are both zero, then the curve will not be set. The user can enter up to ten “Temperature”/“Error” combinations. The range for the “Temperature” field is –300 to 9999. The range for the “Error” field is –30.000 to 30.000.
|
NOTE: Curves are interpolated between points in order to provide a smooth transition between those points. For example:
|
Point |
Temp |
Error |
|
1 |
100 |
0 |
|
2 |
300 |
2 |
In the above setup, temperatures would read as follows:
|
Actual Temperature |
Displayed Temperature |
|
100 |
100 |
|
150 |
150.5 |
|
200 |
201 |
|
250 |
251.5 |
|
300 |
302 |