Manual Event Control
|
|
Events are assignable outputs, used in recipes/programs. Typically, they are used to signal the recipe is complete, to turn process gases off and on, and tell the equipment to do a variety of tasks. The Manual Event Control submenu allows the user to force the events off or on.
The Manual Event Control menu option shows the user all of the events and their current status. It also allows the user to manually control the status of any event by clicking on the value. A single click will display an input box that will allow the user to select either an On value or an Off value.
|
Clicking on the OK button will set the value, while clicking on the Cancel button will cancel the action.
Clicking on the “Value” section of the “Turn off all events” field will force all of the events to Off status. The user will have to confirm this action.
Clicking on the “Value” section of the “Turn ON all events” field will force all of the events to On status. The user will have to confirm this action.
|
WARNING!
Before assigning or changing events, be certain that you are familiar with the function of the event whose status you are going to change. Changing the status of an event without knowledge of the result can lead to hazardous situations.
|