Zone / Load TC Setup

 

This screen is used for Nitrider applications that utilize a Load Thermocouple in addition to the Furnace Control Thermocouple for Soak statements.  The operator must manually select the Thermocouples for the 9210 to use in determining when to start/hold/stop Soak timers in a recipe.  For Nitrider applications that do not use a Load Thermocouple, this menu can be ignored.

Use the up and down arrow keys to highlight a specific thermocouple.  The Load TC Enable can be either: Off, On, or On + Alarm.  Pressing the Enter button while the item is highlighted changes the current status of that particular selection to either Active or Inactive (blank).