SSi Analog Input Setup.

The SSi Analog Input Setup menu option allows the user an input selection of three inputs per module, as well as three input corrections per module.  There are eight modules available.  It is configurable for voltage of T/C (universal input), and it is typically used for Load T/Cs and Auxiliary Flow Meters.

 

 

Input Type 1 – Input Type 3

Clicking on any of the values will display an input box from which the user can select the input type from a drop-down list with the following values:

    B        NNM        160 mV        25.6 volts

    C        R        80 mV            12.8 volts

    E        S        40 mV

    J        T        20 mV

    K        2.56 volts    4-20 mA/124Ω

    N        1.28 volts    4-20 mA/62Ω

 

Input 1 Correction – Input 3 Correction

The corrections can either be not used, or Curve 1 – Curve 3.  The curves are set up using the TC Extension Correction Curves menu option.