Flash Card & Flash Card Reader

Never remove the flash card when the Operator Interface is ON. 

 

To properly shut down the Operator Interface, press the Menu button, and select Shutdown.  At the prompt, press Yes to shut down the operator interface.  This will bring you to a conventional Microsoft Windows screen.  Sliding the black switch (located directly over the green power connector) to the operator interface to the OFF position will turn off the power.

 

Once the Operator Interface is turned off, remove the compact flash card cover at the top of the display unit, exposing the card.  Press the release button and the card will pop out of the slot.  To replace the flash card simply return the card to the slot, making sure that the release button is in it’s up position, and replace the flash card cover to it’s proper position.  To restore power to the unit, move the black switch to the right or ON position.