Electrical Installation

 

The Model 9210 requires 24VDC, 4 Watt, 60 Hz, single-phase power.  A 24 VDC power supply is required and is generally included as part of the Model 9210 system. This power supply has a universal input that can accept between 60 and 265VAC.  Power should be applied in accordance with the electrical drawings that have been supplied.  Since each installation is unique for each site, the customer is responsible for providing adequate power and making it available to the Model 9210 power supply.

 

SSi requirement:

 

MOV’s must be wired across the isolation relay coil terminals on all isolation relays that are connected to solenoids. Further…. MOV’s must be connected across the HOT and NEUTRAL wires when the solenoid is wired to them. IT IS AN ABSOLUTE MUST to have the MOV’s at BOTH LOCATIONS.