DF1 Configuration

This section will allow the user to set up the DF1 configuration settings.

 

My Node

This option will allow the user to select the node.  This node must not exist anywhere else on the computer’s network.  The range is 0 to 30000.

 

PLC node

This option will allow the user to select the PLC node.  This must be the node address of a PLC.  The range is 0 to 30000.

 

PLC  read table

This option will allow the user to select the PLC read table.  The range is 8 to 255.

 

PLC  write table

This option will allow the user to select the PLC write table.  The range is 8 to 255.

 

PLC msg Delay (ms)

This option will allow the user to set the delay, in milliseconds. The range is 50 to 5000.