client Instrument Setup

** All devices on the same client port must utilize the same protocol

** An address of zero (0) will disable the instrument** Some controllers (AC20 for example) can provide dual functions (atmosphere and events) and must have the same address assigned for both.

 

Clicking on the “Value” field for any instrument will allow the user to select the client instrument.

 

Instrument

This value will allow the user to select the client instrument type.

 

Atmosphere Controllers

Some Atmosphere controllers will have an [A] in front of the name

SSI AC20            Eurotherm 2404        MGA

Yokagowa 750            Eurotherm 2500        

Honeywell UDC 3300        Carbpro v3.5

Dualpro LP1 modbus        Carbpro v3.0

Dualpro LP2 modbus        Carb PC

Dualpro LP1 MMI        9200 LP1

Dualpro LP2 MMI        IR Base

 

Temperature Controllers    

Some Temperature controllers will have a [T] in front of the name

SSi 7EK                9200 LP1        SSi Quad AO1

Yokagowa 750            9200 LP2        SSi Quad AO2

Honeywell UDC 3300        9200 LP3        SSi Quad AO3

Dualpro LP1 modbus        9100 LP2        SSi Quad AO4

Dualpro LP2 modbus        Eurotherm 2704 LP1    Yokogawa UT350

Dualpro LP1 MMI        Eurotherm 2704 LP2    Yokogawa 750 LP 2

Dualpro LP2 MMI        Eurotherm 2704 LP3    Yokogawa UP350

Eurotherm 2404            VC base 1        Honeywell DCP551

Eurotherm 2500            VC base 2        Ascon 08

Unipro v 3.5            VC base 3        SSi X5

Unipro v 3.0            VC base 4        SSi M4L    

Carbpro v3.5 client        AIPC            SSi X5/Timer

Carbpro v3.0 client        SSI 7SL

10pro                AEC Flow Board

Dualpro in C            UMC800 LP1

 

Event controllers        

SSI AC E            Micrologix PLC        User 7

Yokagowa 750E            MCM Module        User 8

Mod Mux            PLC5 DF1        User 9

Dualpro E Modbus        SLC DF1        User 10

Dualpro E MMI            User 1            User 11

Carbpro E v3.5            User 2            User 12

Carbpro E v3.0            User 3            User 13

Eurotherm 2500            User 4            User 14

Ssi 8-8                User 5            User 15

SSi 9200 E            User 6            User 16

Address

This value allows the user to select the address that corresponds with the controller selected, with a range of 0 to 249.

 

Port

The options for this field can either be client 1, client 2, or RS-232.

client 1 – terminals 5(-), 6(+)

client 2 – terminals 22(+), 23(-)