Load T/C Configuration

 

Configuration of any analog input device must be completed under this menu item.

 

Load TC Enable

This value will manually toggle between on, on + alarms, and off.

On – T/C Enabled

On + Alarms – T/C Enabled, Programmer alarm114 provided if out of band (Default wait limits)

Off – T/C not enabled

 

Control TC

This value allows the user to set the TC to be part of the group of Load TCs that can hold the program if it is out of band.  The values are active or not active (shown as blank).

 

TC 1 – 27 and Input 1 - 3

This value allows the user to manually turn the T/C from active to not active, shown as blank, to be part of the group of TCs that can hold the program if it’s out of band. Analog Input 1 – Analog Input 3 correspond to TC 28-30.  The values are active or not active (shown as blank).