Flash Card & Flash Card Reader

 

Never remove the flash card when the Operator Interface is “ON”. 

 

To properly shut down the Operator Interface, press the Menu button on the default status screen. Once the menu has been displayed, select the Shutdown option.  At the prompt, press Yes to shut down the Operator Interface.  See the Chapter 2 – Configuration section for information on navigating and using the menu system.  This will display a conventional Microsoft Windows screen.  Sliding the black switch to the OFF position (located directly over the green power connector, on the back of the Operator Interface) will turn off the power to the Operator Interface.

 

Once the Operator Interface is turned off, remove the compact flash card cover at the top of the display unit, exposing the card.  Press the black release button and the card will pop out of the slot.  To replace the flash card, simply return the card to the slot making sure that the release button is in its UP position, and replace the flash card cover to its proper position.  To restore power to the unit, move the black switch to the right or ON position.