Passcode and Alarm

There are three levels of menus in the 9125 controller - Operator, Supervisor, and Administrator

 

Operator Level

These are functions typically handled by a furnace operator and do not require a passcode.  When an operator is logged in, the lock on the toolbar will be blue - . 

 

Supervisor Level

These are functions typically used by a supervisor and require a level 1 passcode.  When a supervisor is logged in, the lock on the toolbar will be gold - .  To change the level 1 passcode, or the web level 1 passcode, click on the “Level 1 Code” value (range is –32768 to 32767) or the “Web Level 1 Code” value (range is 0 to 9999) and an input box will be displayed where the user can select a new value. 

 

Administrator

These are functions typically used by an administrator and require a level 2 passcode.  When an administrator is logged in, the lock on the toolbar will be green - .  To change the level 2 passcode or the web level 2 passcode, click on the “Level 2 Code” value (range is –32768 to 32767) or the “Web Level 2 Code” value (range is 0 to 9999) and an input box will be displayed where the user can select a new value.

 

Web Change Enable

This option will determine if changes can be made over the 9125’s web page.  Clicking on this value will toggle between a 1 (Yes) and a 0 (No).

 

Alarm 1 – Alarm 3

The user can choose either normally open or normally closed.